Autoplugin    >    Heater Remote Control    >    Volkswagen    >    AV Modules    >    Autoplugin RCP-AV
Autoplugin RCP-AV
RCP is an interface module between Volkswagen factory equipped fuel fired heater (FFH) and control device. It allows to connect almost any convenient remote control to FFH.
Features  /  Tech Specs  /  Buy...
1. Remote Start / Stop of the Heater by Remote Key
Autoplugin RCP lets you immediately start of fuel fired heater by original remote key. It uses a combination of buttons presses to activate this function. And certainly, you can use driver information system (DIS) to program the heater,
as you did it before.
2. Variety of Remote Controls
Autoplugin RCP has a set of inputs for easy connection of diverse remotes, like Webasto Telestart, Eberspacher Easy Start, Defa Smart Start, GSM-modules (to control heater using mobile phone), alarm systems controls, etc.
3. Main Battery Protection from Discharging
Fuel fired heater uses energy of the vehicle's main battery to operate, not only fuel. Autoplugin RCP may control a level of battery voltage to prevent the battery from discharging.

The level can be adjusted in accordance of battery condition. Also you can limit time of autonomous work of the heater.
4. Control of External Devices
Autoplugin RCP allows you to control external devices while the heater operates.
Functions and examples of their use:
  • Disconnection of consumers during the heater operation to conserve battery power
    (for example, turning off the climate control fan)
  • Disable highly sensitive sensors of additional alarm system to prevent false alarm triggering when the heater operates
    Art. N: 0107-1100
    Stock: Out Of Stock
    Models with factory equipped fuel fired heaters:
  • Volkswagen Touareg 2010...
    Features  /  Tech Specs  /  Buy...
    Compatibility Models, factory equipped with
    Eberspächer D5S-F fuel-fired heaters:
  • Volkswagen Touareg 2010...
    Implementation Electronic module for embedded installation
  • Permanent connection to the car wiring
    Main Functions of the Heater Control
  • Immediate start of the heater by remote
  • Immediate stop of the heater by remote
    Standard Remote Control
  • Volkswagen key
    Possibility to Use
    an Additional Remote Control
    Possibility of the Heater Control by the Additional Button Yes
  • Immediate start of the heater by remote
  • Immediate stop of the heater by remote
  • Indication of the heater run-time errors by built-in indicator
    Inputs & Outputs
  • Separate inputs to the heater start and stop, controlled by short impulses of positive or negative polarity
  • Additional input to the heater start / stop by specialized remote (Defa Smart Start, Telestart, Easy Start, GSM Module)
  • Input for additional button
  • The pare of inputs / outputs for alarm sensitive or volume sensors disabling, during heater operation
  • Two programmable outputs for notification of the heater working. A variety of signals can be given on these outputs:

  • Heater has started
  • Heater started to heat
  • Heater stopped
  • Engine is warm
  • Heater doesn't start
  • Heater error
  • Programmable status output to control vehicle's modules, not available by CAN-bus, during the heater operation (climate control module switching off in order to save battery energy, etc.):

  • Heater operates
  • Heater operates autonomously (without engine)
  • Engine runs (potential signal)
  • Engine runs (RPM signal)
  • Ventilation switched on while the heater operates autonomously
  • Ventilation switched off while the heater operates autonomously
  • Main Battery Protection from Discharging
  • Monitoring and limitation of time of autonomous work of the heater
  • Monitoring of battery voltage before the heater start. It includes heater start cancel and error indication in case of low voltage. Adjustable, off by default.
  • Monitoring of battery voltage while the heater operates. It includes heater shutting off and error indication in case of low voltage. Adjustable, off by default.
    The Heater Control Method Via CAN-bus
    Power Consumption 1.5 mA
    Working Temperatures -40 C ... +85 C
    Dimensions & Weight
    What's in the Box
  • Module
  • Installation set
  • Documentation (en)
    Note for the Range
    The RCP module does not have a built-in receiver. Thus, the range will be identical to that used remote solution.
    Features  /  Tech Specs  /  Buy
    Please complete and submit the form to make the order.
    We will send invoices through PayPal to your email. Usually, the orders
    are shipped within 2 working days after payment.
    We take orders and answer them manually. Sorry, it's possible delay in the response.
    Autoplugin RCP-AV Module (0107-1100) Out Of Stock
    20,- Eur
    End user firmware license   What for? Open in new window icon 157,- Eur
    Standard Int'l Shipping 1,- Eur
    Mark the declaration as a gift and remove the receipt Mark the declaration as commercial and attach the receipt for 20 Eur Mark the declaration as commercial and attach the full receipt
    Name and Surname
    ZIP Code
    Postal Address
    Model / Year
    Note! Other expenses (customs clearance, taxation of goods in the territory of the buyer etc.) do not related with the shipping costs and are to be paid by the buyer according to the government tariffs operated in the country of buyer.
    We accept PayPal. It is safe and secure.

    When transactions need only a login and password, you dont expose bank details or card numbers. Its an added layer of protection for your financial information.

    If something goes wrong with an order, PayPal will investigate. If your transaction qualifies for Purchase Protection, PayPal will reimburse you for the full purchase price plus any original shipping costs.
    Please note that the orders
    are sent from outside of EU.
    EU customs duties info Open in new window icon