RCP is an interface module between factory equipped fuel fired heater and control device. It allows to connect almost any convenient
remote control to fuel fired heater.
The module needs that 2 timers and direct start / stop function in the dashboard for
the heater control are present.
¹ Some functions need permanent connection to the car wires.
Remote Start / Stop of the Heater by Remote Key
Autoplugin module lets you immediately start of parking fuel fired heater by original remote key. It uses a combination of buttons presses
to activate this function. And certainly, you can use the dashboard to program the heater, as you did it before.
Variety of Remote Controls¹
Autoplugin RCP has a set of inputs for easy connection of diverse remotes, like Webasto Telestart, Eberspacher Easy Start,
Defa Smart Start, GSM-modules (to control heater using mobile phone), alarm systems controls, etc.
Plug and Play or Permanent Installation
To the OBD-II diagnostic socket on the dashboard using a special cable (included)
Autoplugin module may flash by turn signals indicators in rear-view mirrors to inform user that the heater started and operates. It's adjustable
function, which may be switched on or off (off set by default).
Main Battery Protection from Discharging
Fuel fired heater uses energy of the vehicle's main battery to operate, not only fuel. Autoplugin module may
control a level of battery voltage to prevent the battery from discharging.
The level can be adjusted in accordance of battery condition.
Also you can limit time of autonomous work of the heater.
Tech Specs
Compatibility
Models with factory equipped parking fuel-fired heater:
Ford Galaxy 2006—2015
Ford Mondeo 2007—2013
Ford S-Max 2006—2015
Connection
To the OBD-II diagnostic connector
Easy permanent connection to the OBD-II wires with quick splice connectors
Permanent connection to the car wiring
Remote Control
Vehicle's remote key
Additional remote control device¹
Output
Programmable output to control engine or interior electric heater, climate control and other vehicle's modules, during the heater operation
(switching off in order to save battery energy, etc.)
Main Battery Protection from Discharging
Monitoring and limitation of time of autonomous work of the heater.
Monitoring of battery voltage before the heater start. It includes heater start cancel and error indication in case of low voltage.
Adjustable, off by default.
Monitoring of battery voltage while the heater operates. It includes heater shutting off and error indication in case of low voltage.
Adjustable, off by default.
The Heater Control Method
Via CAN-bus
Working Temperatures
-40 °C ... +85 °C
Power Consumption
1.5 mA
Dimensions
What's in the Box
1.
Module RCP
2.
Plug and Play cable
3.
Permanent connection cable
4.
Quick splice connectors
5.
Adhesive tape
Documentation (en)
Buy
We accept P2P transfer
We can accept a P2P payment by card-to-card transfer or to the account by IBAN number.